電磁爐的泄漏電流
我在檢測電磁爐的泄漏電流時,發現電磁爐上的不銹鋼鍋體的泄漏電流達到3.6mA,是否可以判定這個電磁爐的泄漏電流不合格
全部回復(2)
正序查看
倒序查看
IEC60335-1 clause 13.2有如下規定,
– for stationary class I heating appliances 0,75 mA or 0,75 mA per kW rated power input of the appliance with a maximum of 5 mA, whichever is higher.
一般電磁爐應該是駐立式1類電熱器具,按照以上規定,要看你的功率,最大可以達到5mA,不知道電磁爐的part 2 特殊標準里有沒有其他漏電流的規定,要查了才知道,沒做過電磁爐,所以意見僅供參考啦.
– for stationary class I heating appliances 0,75 mA or 0,75 mA per kW rated power input of the appliance with a maximum of 5 mA, whichever is higher.
一般電磁爐應該是駐立式1類電熱器具,按照以上規定,要看你的功率,最大可以達到5mA,不知道電磁爐的part 2 特殊標準里有沒有其他漏電流的規定,要查了才知道,沒做過電磁爐,所以意見僅供參考啦.
0
回復
@ivansunfeijian
IEC60335-1clause13.2有如下規定,–forstationaryclassIheatingappliances0,75mAor0,75mAperkWratedpowerinputoftheappliancewithamaximumof5mA,whicheverishigher.一般電磁爐應該是駐立式1類電熱器具,按照以上規定,要看你的功率,最大可以達到5mA,不知道電磁爐的part2特殊標準里有沒有其他漏電流的規定,要查了才知道,沒做過電磁爐,所以意見僅供參考啦.
IEC60335-2-9 clause 13.2如下規定:
-If there is earthed metal between live parts and the surface of glass-ceramic or similar material of hotplates, the leakage current is measured between live parts and each vessel in turn connected to the earthed metal. It shall not exceed 0,75 mA. If there is no earthed metal, the leakage current, measured between live parts and each of the vessels in turn, shall not exceed 0,25 mA.
-電磁爐看作是便攜式器具,
-不能超過0.25mA啊
你的是什么電磁爐啊鍋有這么大的漏電流,第一次聽.
-If there is earthed metal between live parts and the surface of glass-ceramic or similar material of hotplates, the leakage current is measured between live parts and each vessel in turn connected to the earthed metal. It shall not exceed 0,75 mA. If there is no earthed metal, the leakage current, measured between live parts and each of the vessels in turn, shall not exceed 0,25 mA.
-電磁爐看作是便攜式器具,
-不能超過0.25mA啊
你的是什么電磁爐啊鍋有這么大的漏電流,第一次聽.
0
回復
