變壓器傳導
我公司現在在做一款變壓器,認證公司說輸出端傳導沒過,這個是我第一次聽到,不知道要咋樣更改,有人知道嗎
全部回復(6)
正序查看
倒序查看
在EN55014-1的5.1.3中有說到電源端子以外的負載端騷擾測試
5.1.3 Voltage probe
The voltage probe shall be used when measuring on terminals other than mains terminals (see 5.2.3.2)
e.g. load and control terminals (5.2.4.4). The voltage probe shall also be used on mains terminals
when the artificial mains V-network cannot be used without unduly influencing the equipment under
test or the test equipment, e.g. while measuring motors and heating devices operating at more than 25
A per phase.
5.1.3 Voltage probe
The voltage probe shall be used when measuring on terminals other than mains terminals (see 5.2.3.2)
e.g. load and control terminals (5.2.4.4). The voltage probe shall also be used on mains terminals
when the artificial mains V-network cannot be used without unduly influencing the equipment under
test or the test equipment, e.g. while measuring motors and heating devices operating at more than 25
A per phase.
0
回復
