我上傳一個比較簡單的參數計算公式和原理圖1105067088.zip

這是計算葉面
500) {this.resized=true; this.width=500; this.alt='這是一張縮略圖，點擊可放大。\n按住CTRL，滾動鼠標滾輪可自由縮放';this.style.cursor='hand'}" onclick="if(!this.resized) {return true;} else {window.open('http://u.dianyuan.com/bbs/u/25/1105067190.gif');}" onmousewheel="return imgzoom(this);">

這是原本的模型,我看不出哪里錯?


#VERSION /component/pwm/acl/pwm_1/mc34063a.dec@@/main/1
#DATED Wed Jun 9 12:05:25 PDT 1999
#*********************************************************************
#               This template created by Analogy, Inc.               *
#           for exclusive use with the Saber(R) simulator.           *
#   Saber is a registered trademark of American Airlines, licensed   *
#   to Analogy Inc.  Copyright 1989-1999, Analogy Inc.               *
#   This template may not be  reproduced in any way (physically or   *
#   electronically)  without permission  from Analogy,  Inc.   The   *
#   content  of this template is subject to change without notice.   *
#   Analogy does not assume liability for the use of this template   *
#   or the results obtained from using it.                           *
#*********************************************************************
encrypted component template mc34063a vcc gnd drv_c sw_c sw_em ct ipk \
inv_comp= ratings, rth_ja, rth_jc, rth_hs, part_type, part_class
######################### USAGE NOTES AND CAUTIONS ####################
#
#######################################################################
# Ratings information
pwmtype..ratings ratings =
     (tjmax = 70,
     tjmin = 0,
     pdmax_ja = 1.25e+00,
     pdmax_jc = 3.00e+00,
     vccmax = 40,
     vinmin = -0.3,
     vinmax = 40,
     dvinmax = undef,
     vin2max = undef,
     voutmax = undef,
     ioutmax = 2.00e-01,
     vformax = undef,
     vformin = undef,
     vpwrgnd = undef,
     iformax = undef,
     irefout = 5.00e-02,
     isoftmax = 5.00e-02,
     ieaout = 5e-3,
     isynout = 5e-3,
     ioscout = 5e-3,
     ioscchg = undef)
number   rth_ja = 100,
         rth_jc = 2,
         rth_hs = undef
string part_type = "PWM"
string part_class = "Voltage Mode"
export val p  pwrd
export val tc tempj
external number temp, include_stress
{
# Manufacturer information
pwm_info..mfr_info mfr_info =
     (mfr_part_num = "MC34063A",
     libs = [dxocl],
     config = single,
     num_of_outputs = 1,
     pkg = pdip_8,
     mfr = moto)
# Manufacturer specification
pwm_info..mfr_specs mfr_specs =
     (freq_max = 100e3,
     tol_vref = 2,
     duty_max = 95)

<>

在模型里面,有個地和Vin接在一起了.
在仿真的時候波形不會正常的,自己試試吧.
saber公司總部給了一個正確的模型給我門公司.
:)

能把正確的模型發上來嗎?謝謝!

#VERSION mt_component/pwm/acl/pwm_2/mc34063a.dec@@/main/2
#DATED 07-Dec-2004.22:20:30
#**********************************************************************#
#                     Copyright 2004 Synopsys Inc.                     #
#          This template and the associated documentation are          #
#             confidential and proprietary to Synopsys, Inc.           #    
#        Your use or disclosure of this template is subject to         #
#       the terms and conditions of a written license agreement        #
#           between you, or your company, and Synopsys, Inc            #
#**********************************************************************#
encrypted component template mc34063a vcc gnd drv_c sw_c sw_em ct ipk \
inv_comp= ratings, rth_ja, rth_jc, rth_hs, part_type, part_class
######################### USAGE NOTES AND CAUTIONS ####################
#
#######################################################################
# Ratings information
pwmtype..ratings ratings =
     (tjmax = 70,
     tjmin = 0,
     pdmax_ja = 1.25e+00,
     pdmax_jc = 3.00e+00,
     vccmax = 40,
     vinmin = -0.3,
     vinmax = 40,
     dvinmax = undef,
     vin2max = undef,
     voutmax = undef,
     ioutmax = 2.00e-01,
     vformax = undef,
     vformin = undef,
     vpwrgnd = undef,
     iformax = undef,
     irefout = 5.00e-02,
     isoftmax = 5.00e-02,
     ieaout = 5e-3,
     isynout = 5e-3,
     ioscout = 5e-3,
     ioscchg = undef)


number   rth_ja = 100,
         rth_jc = 2,
         rth_hs = undef

string part_type = "PWM"
string part_class = "Voltage Mode"
export val p  pwrd
export val tc tempj
external number temp, include_stress

{
# Manufacturer information
pwm_info..mfr_info mfr_info =
     (mfr_part_num = "MC34063A",
     libs = [dxocl],
     config = single,
     num_of_outputs = 1,
     pkg = pdip_8,
     mfr = moto)
# Manufacturer specification
pwm_info..mfr_specs mfr_specs =
     (freq_max = 100e3,
     tol_vref = 2,
     duty_max = 95)

<>

謝了,但看不出有啥區別啊!

是不對,你的是正確的嗎?

這個是正確的嗎?

這個是saber2007里面自帶的那個,我看了一下,一模一樣的.

這個只是在原理圖中查看元件屬性時看到的,用寫字板打開它的原文時,還有好多東西看不明白.全是數字.

都是加密文件,能看明白才怪呢