現在大多數工程師在測試LED電源時,有的用LED燈珠,有的用普通型的電子負載,有用1000多元,有用3000元的,但市面上大多的電子負載是不能模擬LED燈珠的,所以,測試出來的功率因數應該是不正確的.這也是為什么CHROMA,以及博計推出專用的LED電子負載. 同時,深圳新能基科技也推出了相應的電子負載,具有LED,CC,CP,CV,CR等五種模式,不但可以測試LED電源,也可以測試充電器,適配器等電源,是一個多功能的電子負載.具有與CHROMA,博計一樣的功能,但價格相對應來說要低很多.
預計年底可以量產,敬請大家的期待! (同時,新能基將參加 電源網11月電源技術論壇,屆時請大家參觀指導!)
但,具有測試LED功能的電源測試系統,新能基科技早電子負載一步推了出來,一經推出得到廣大電源企來的青睞.
真正實現LED電源測試的自動化, 為電源企業提高生產效率,降低測試成本.
詳情也可登入http://www.sts-ate.com 電話咨詢:013377782881 許生
不同的配置,滿足不同的需求!
ATC1500-QRX:
具有以下測試項目:
:ATC1500-S
ATC1500-D:
主要功能特點：
1.可以測試150W以內任何單組輸出電源
2.圖形界面基于Windows XP環境
3.測試程序編輯功能
4.測試項目選擇功能（輸入/輸出/空載/短路
5.欠壓/穩壓/過載/紋波/效率等功能）
6.統計測試報告（Excel電子檔）
7.自動生成CPK等品質報表
8.配置靈活
9.性價比高，適合大中小企業。
10.測試速度快
11.測試不良結果實時打印功能
測試項目：
啟動測試(Start-up)
欠壓測試(UVLO)
待機測試(Idle)
恒壓區測試(Standard CV)
恒流區測試(Standard CC)
LED驅動電源測試（LED）
短路測試(Short Circuit)
過壓測試(Over Voltage)
過流測試(Over Current)
線調整(Line Regulation)
負載調整(Load Regulation)
關機測試(Power Down)
支持性測試(Support Function)
Test Name |
Parameter and Range(測試項目與量程) |
Accuracy |
STAR 啟動測試 |
Inrush current: 0 – 83Apk Startup time: 0 to 32767msec. Output voltage overshoot: 0 – 60Vpk |
±1% (reading + range) ±1ms ±1% (reading + range) |
UVLO欠壓測試 |
Functional test only, Pass/Fail |
N/A |
IDLE 待機測試 |
Standby input power: 0 – 5/25/250/1250W Standby input current: 0 – 0.1/0.5/5/25Apk Input voltage: 30 – 280V*Note 2 |
±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) |
STANDARD CV (Constant Current and Constant Resistance load) 恒流 |
CC Mode: 0 – 3/15 A CR Mode: 0.1 – 50Ohm Input Voltage: 30 – 300Vrms *Note 1 Input Current: 0 – 0.1/0.5/5/25Apk Input Power: 0 – 5/25/250/1250W Power Factor 0 – 1.0 Output Voltage 0 – 15/60Vdc Output Current 0 – 3/15Adc Efficiency: 0 – 100% Ripple/Noise 200kHz: 0 – 500mV Ripple/Noise 20MHz: 0 – 500mV |
±0.15% (setting + range) ±0.3% (setting + range) *Note 2 ±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) ±0.2% (reading + range) ±0.05% (reading + range) ±0.1% (reading + range) ±0.25% (reading + range) ±2% (reading + 5mV) ±2% (reading + 5mV) |
STANDARD CC (Constant Voltage and Constant Resistance load)恒壓 |
CV Mode: 0 – 15/60V CR Mode: 0.1 – 50Ohm Input voltage: 30 – 300Vrms *Note 1 Input Current: 0 – 0.1/0.5/5/25Apk Input Power: 0 – 5/25/250/1250W Power Factor 0 – 1.0 Output Voltage 0 – 15/60Vdc Output Current 0 – 15Adc Efficiency: 0 – 100% |
±0.15% (setting + range) ±0.3% (setting + range) *Note 3 ±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) ±0.2% (reading + range) ±0.05% (reading + range) ±0.1% (reading + range) ±0.25% (reading + range) |
LED Driver Test (LED Load) LED驅動 |
Input voltage: 30 – 300 Vrms *Note 1 Input Current: 0 – 5/25Apk Input Power: 0 – 250/1250W Power Factor 0 – 1.0 Output Average Current reading: 0 – 15Adc Output Average Voltage reading: 0 – 60Vdc Output pulsed current reading (TRIAC, PWM) |
±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) ±0.2% (reading + range) ±0.1% (reading + range) *Note 4 ±0.05% (reading + range) *Note 4 ±0.5% (reading + range) |
SHORT CIRCUIT
短路測試 |
Input voltage: 30 – 300 Vrms *Note 1 Input Current: 0 – 5/25Apk Input Power: 0 – 250/1250W Power Factor 0 – 1.0 Output Average Current: 0 – 15Adc |
±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) ±0.2% (reading + range) ±0.2% (reading + range) *Note 4 |
OVER CURRENT 過流 |
Current trip point: 0 – 3/15Adc Trip point voltage: 0 – 15/60Vdc Wait Time >= 10msec. Wait Time < 10msec. Voltage Before Trip Point: 0 – 15/60Vdc Current Before Trip Point: 0 – 3/15Adc |
±0.1% (reading + range)
±0.05% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) |
OVER VOLTAGE 過壓測試 |
OV trip point: 0 – 60V |
±0.1% (reading + range) |
LINE REGULATION 線性調整率 |
Voltage regulation: 0 – 100% |
±0.1% (reading + range) |
LOAD REGULATION 負載負整率 |
Voltage regulation: 0 – 100% |
±0.1% (reading + range) |
AVERAGE EFFICIENCY 平均效率 |
Efficiency: 0 – 100% |
±0.25% (reading + range) |
I-V CURVE PLOT I-V曲線 |
CC Mode: 0 – 3/15 A CC Mode Output Voltage 0 – 15/60Vdc CC Mode Output Current 0 – 3/15Adc CV Mode: 0 – 15/60V CV Mode Output Voltage 0 – 15/60Vdc CV Mode Output Current 0 – 15Adc |
±0.15% (setting + range) ±0.05% (reading + range) ±0.1% (reading + range) ±0.15% (setting + range) ±0.05% (reading + range) ±0.1% (reading + range) |
POWER DOWN 關機測試 |
Holdup time: 0 – 65535 msec. Input voltage: 30 – 300Vrms *Note 1 Output Current 0 – 3/15Adc Output voltage overshoot: 0 – 60Vpk |
±1ms ±0.1% (reading + range) ±0.1% (reading + range) ±1% (reading + range) |
Global Setting |
Load On Voltage: 0 – 60Vdc Wait Time: 0 – 32767msec. Nominal Output Voltage: 0 – 60Vdc Nominal Output Current: 0 – 15Adc |
±1% (reading + range) ±1ms ±1% (reading + range) |
Optional Setting 支持性功能 |
Bias Output Voltage : 0 – 28Vdc Relay State rated current: 3A |
±0.2% (reading + range) - |
